Warnings
Product specifications
Read before using
* Read and understand all instructions before use.
* If damage is caused by failure to follow this instructions, the warranty does not apply.
* Only use alkaline batteries.
* Do not expose the product and accessories to rain or water.
* Do not expose the product to corrosive substances to avoid damage to the protective cover.
* Do not scrape the fingerprint sensor with any sharp objects, otherwise it may cause permanent damage.
* When cleaning the product, please wipe with a soft cloth.
* If there is a low battery alert, please replace all the batteries in time and make sure they are properly installed.
1. You can follow the voice guide by multi-language (English/Chinese).
2. Master PIN code (6~12 digits): Default master PIN code is “12345678”, please modify it after installation.
3. User PIN code (6~12 digits): Maximum capacity is 10 with user number [00-09].
4. Fingerprint: Maximum capacity is 100 with user number [00-99].
5. Card: Maximum capacity is 100 with user number [00-99].
3
Inside panelOutside panel
Key cylinder
Key cylinder
Emergency power port
Emergency power port
Reboot button
Reboot button
Touch keypad
Push pull handle
Card reader area
CLOSE/OPEN
button
Battery cover
Push pull
handle
Safe handle
switch
Fingerprint sensor
To Next Page
Loading...
