Need help?Do you have a question about the Hägglunds Compact CA and is the answer not in the manual?
Details safety precautions and warning signs for installation and operation.
Provides detailed specifications for various Compact CA motor models.
Explains the radial-piston type motor's operation and design features.
Specifies required charge pressure for different operating conditions and speeds.
Guidelines for selecting appropriate hydraulic fluids and seal compatibility.
Recommendations for system filtration and filter grades for optimal performance.
Details on precise motor installation, shaft fitting, and torque considerations.
Safe procedures and considerations for lifting the motor and torque arm.
Detailed steps for mounting the coupling onto the motor's hollow shaft, including torqueing.
Procedure for attaching the torque arm to the motor, including screw tightening torques.
Steps for mounting the motor onto the driven shaft using a shaft coupling, with or without a mounting tool.
Procedure for mounting the motor onto a splined shaft, for flange or torque arm mounted types.
Instructions for safely removing the motor from the driven shaft, with or without a mounting tool.
Details on mounting the reaction point, including alignment and foundation considerations.
Describes the MDA brake's functional description and control of braking torque.
Procedure for installing MDA brake hydraulics, including activation time and opening pressure.
Technical data, torque, pressure, and oil volume for MDA 5, 7, and 10 brakes.
Step-by-step guide for mounting the MDA 5, 7, and 10 brakes onto the motor.
Technical data, torque, pressure, and oil volume for MDA 14 and 21 brakes.
Procedure for mounting MDA 14 and 21 brakes, for flange or torque arm configurations.
Details on motors with 2-speed function, direction of rotation, and pressure limits.
Diagrams and tables detailing motor oil port connections and their descriptions.
How to determine and set the correct direction of motor shaft rotation.
Procedures for draining and venting the motor for horizontal, vertical, and shaft-down mounting.
Instructions for storing the motor to protect it from rust and maintain its condition.
Essential checks to perform before the initial start-up of the motor.
Steps and checks required for the initial operation and run-in period of the motor.
Overview of periodic maintenance tasks and recommended service intervals.
Guidance on oil analysis, viscosity, and oxidation to ensure optimal fluid condition.
Purpose and methods for inspecting oil condition to detect wear and predict maintenance needs.
Common faults for hydraulic motors, their probable causes, and corrective actions.
Troubleshooting common faults related to the MDA brake system.
Faults related to the two-speed valve function and potential causes.
To Next Page
General
