Hägglunds Compact CA - Page 16

16
Installation and Maintenance Manual, Compact CA
Lifting Compact Tandem motor
Always make sure where centre
of gravity is before any lifting.
Never stand below the motor
during lifting.
Lifting method
Figure 3.5b
Data for the Tandem motor
Installation
See 3.1 Mounting instructions.
* See Engineering Manual AC-3.5
Installation
Oiling of splines with hydraulic oil.
Fill up to plug G3/4". 90 Nm / 65 lbf
.
ft.
Tandem motor
Max. pres-
sure bar
(psi)
Max.
speed
rpm
Total weight
Spline ver-
sion
kg (lb)
Total weight
Shaft ver-
sion
kg (lb)
Max. torque
to driven
shaft*
Nm (lbf·ft)
CA50 XB0NH + TA5 + CA50 SA0N 245 (3552) 280 399 (878) 427 (936)
24500 (18000)CA70 XB0NH + TA5 + CA50 SA0N 205 (2972)
240
429 (944) 456 (1003)
CA70 XB0NH + TA7 + CA70 SA0N 175 (2538) 462 (1016) 489 (1076)
CA100 XB0NH + TA5 + CA50 SA0N 325 (4712)
270
489 (1076) 534 (1175)
49000 (36100)
CA100 XB0NH + TA7 + CA70 SA0N 290 (4205) 522 (1148) 567 (1247)
CA100 XB0NH + TA10 + CA100 SA0N 245 (3552) 638 (1404) 683 (1503)
CA140 XB0NH + TA5 + CA50 SA0N 260 (3770)
220
529 (1164) 571 (1256)
CA140 XB0NH + TA7 + CA70 SA0N 235 (3408) 562 (1236) 604 (1329)
CA140 XB0NH + TA10 + CA100 SA0N 205 (2972) 678 (1492) 720 (1584)
CA140 XB0NH + TA14 + CA140 SA0N 175 (2538) 718 (1578) 760 (1672)
CA210 XB0NH + TA5 + CA50 SA0N 280 (4060)
115
619 (1362) 680 (1496)
73500 (54200)
CA210 XB0NH+ TA7 + CA70 SA0N 260 (3770) 652 (1434) 713 (1569)
CA210 XB0NH + TA10 + CA100 SA0N 235 (3408) 768 (1690) 829 (1824)
CA210 XB0NH + TA14 + CA140 SA0N 210 (3045) 808 (1778) 869 (1912)
CA210 XB0NH + TA21 + CA210 180 SA0N 190 (2755) 898 (1976) 959 (2110)
CA210 XB0NH + TA21 + CA210 SA0N 175 (2538) 898 (1976) 959 (2110)