To Next PageTo Next Page
Need help?Do you have a question about the Haier AV08IMVEVA and is the answer not in the manual?
General| Brand | Haier |
|---|---|
| Model | AV08IMVEVA |
| Category | Air Conditioner |
| Language | English |
Important safety instructions and precautions for using the appliance.
Specifies the valid operating ranges for cooling and heating modes.
Critical safety warnings regarding installation and usage to prevent severe injury or death.
Cautions to prevent minor injuries, equipment damage, or property loss.
Key items to check before commencing installation work.
Guidelines for choosing an appropriate and safe location for unit installation.
Instructions and precautions for safely moving the unit during installation.
Technical drawings showing unit dimensions and installation points.
Details on installing the outdoor unit, including standard accessories.
Specifications for installing multiple outdoor units together.
Guidance for installing units where the wall is higher than the condenser.
Factors like seasonal wind and exhaust duct requirements for outdoor unit placement.
Steps for removing and reassembling unit panels for maintenance.
Requirements and dimensions for installing air ducting systems.
Methods, cautions, and specifications for connecting refrigerant pipes.
Detailed tables for pipe sizing based on capacity and length.
Guidelines on maximum pipe lengths and vertical drops between units.
Criteria for selecting appropriate branch pipes based on indoor unit capacity.
Important notes and procedures related to the physical installation of pipes.
Steps for performing a pressure test to detect refrigerant leaks.
Procedure for removing air and moisture from the refrigerant system.
Instructions for adding refrigerant based on piping length and system capacity.
Guidelines for applying heat insulation to refrigerant pipes.
Specifications for leakage protection and circuit breakers for outdoor units.
Guidance on connecting and installing power supply lines.
Diagrams illustrating wired and wireless communication wiring setups.
Specific instructions for installing the IGU09 module.
Explanation of dip switch functions for outdoor unit configuration.
Details on the BM1 series of dip switches for system settings.
Details on the BM2 series of dip switches for system settings.
Details on the BM3 series of dip switches for outdoor machine settings.
Details on BM4 dip switches for group class settings.
Explanation of codes and displays on the outdoor unit's digital tube.
How to view and interpret indoor unit parameters.
Configuration of addresses for outdoor units in a multi-unit system.
Monitoring and control of system status through various displays.
How to display and adjust E2 control parameters.
List and description of failure codes specific to the outdoor unit.
Continuation of outdoor unit failure code descriptions.
Further continuation of outdoor unit failure code descriptions.
Detailed explanations for various failure codes encountered by the system.
List of failure codes specific to indoor units.
Description of different operating modes and their performance characteristics.
Steps and precautions for conducting the initial trial operation of the unit.
