EasyManua.ls Logo

Haier H-MRV Series - Refrigerant Pipes between Manifold Pipes

Haier H-MRV Series
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
gas pipe
heat preservation material
liquid pipe
heat preservation material
FQG-B180
Refrigerant pipes between manifold pipes
Total refrigerating amount of indoor unit
g
rou
p
after the manifold
p
i
p
e
Gas side Liquid side
Less than 38220Btu/h 15.9 9.52
38220~61157Btu/h 19.05 9.52
61157~126137Btu/h 25.4 12.7
Note: 1. Y-shape manifold pipe can be placed in horizontal or vertical
direction
2. The manifold pipes must be welded with hard-solder
3. Pay attention to cut off the unnecessary part from its middle
parts of each joint, and to remove burr.
>a__WcU[S^ <[c >a`V[e[a`Wc
-52-

Table of Contents

Related product manuals