Select whether the drain hose will be connected to the left or right side.(Fig.3) Insert the drain hose into the drain pan, then secure the
drain hose with a nylon fastener. (Fig.6)
2. INSTALLING DRAIN HOSE
Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the indoor unit.
Do not install the unit drain hose side is too high. Height A should be less than 5 mm.(Fig.9)
Wrap the insulation (drain hose) around the drain hose connection.(Fig.7)
Arrange the drain hose
lower than this portion.
(Fig. 8)
OK NO NO
Drain hose
CAUTION
Wall
10cm
6mm
Indoor unit outdoor unit
(Fig. 4)
For series 14,18,24 when installing set to wall, install
the accessory wall bracket at the position shown in
Fig.5,and mount the set to it.
(Fig. 5)
Wall bracket
Side of set
65.5cm
99cm
50cm
24.5cm
6.5cm
12.5cm 10cm
6.5cm
53cm
4.5cm
7cm hole
3.5cm hole
Drain pan
Drain hose
Nylon fastener
(Fig. 6)
(Fig. 7)
Drain pan
Drain hose
Insulation
(Drain hose)
Drain hose
(Fig. 9)
A
Drain hose
A
B. UNDER CEILING TYPE
Using the installation template, drill holes for piping and anchor bolts(for holes).(Fig.10)
(Fig. 10)
Installation
template
Wall
Ceilling
Drilling position
for piping
Drilling position
for anchor bolt
For series 14,18,24
200mm
900mm
>a__WcU[S^ <[c >a`V[e[a`Wc
-72-
To Next Page
Loading...
