Why does water remain in my Haier Dishwasher after the cycle is complete?
If water remains inside your Haier Dishwasher after the program has ended, it could be due to a blockage in the drainage hose, a jammed pump, blocked filters, or the programme still running. Check for blockages in the drainage hose, unjam the pump, clean the filters, or wait for the programme to end.
Why are my dishes not drying in the Haier HDW12-TFE3WH?
If your dishes and cutlery are not drying in the Haier Dishwasher, ensure that the selected programme includes a drying function, the amount of rinse-aid is sufficient, and you are waiting long enough before removing the items. Select a programme with a drying function, increase the amount of rinse-aid, and wait longer before removing the items.
How to troubleshoot a Haier Dishwasher that does not start up?
If your Haier Dishwasher doesn't start, check the following: ensure the fuse in the mains electricity supply is working, the plug is correctly inserted into the wall socket, the appliance door is properly closed, the programme button has been pressed, the water tap is turned on, and the strainer in the water intake hose is not blocked. Check the fuse; insert the plug, close the door, press the programme button, turn on the water tap, and unblock the strainer if necessary.
What to do if food is stuck on dishes after using the Haier Dishwasher?
If food remnants are stuck on dishes and cutlery in your Haier Dishwasher, it could be due to several reasons. Ensure the dishwasher is loaded properly, reduce the number of items in the rack, and make sure items are spaced apart. Also, check that you're adding enough detergent, selecting an intensive wash programme, the spray arm can rotate freely, nozzles in the spray arm are clear, filters are clean and correctly fitted, and the waste-water pump isn't jammed. To resolve this, load the dishwasher correctly, reduce items, space them apart, add more detergent, select a more intensive program, ensure free spray arm rotation, clear nozzle blockages, clean and correctly fit filters, and unjam the waste-water pump.
How to remove white stains from dishes in my Haier HDW12-TFE3WH Dishwasher?
If white stains are left on crockery or glasses have a milky appearance in your Haier Dishwasher, it could be due to insufficient detergent, a low rinse-aid setting, lack of salt, a low water softener setting, a loose salt container lid, or using a phosphate-free detergent. Try adding more detergent, increasing the rinse-aid, adding salt, adjusting the water softener, tightening the salt container lid, or switching to a detergent containing phosphates.
Why does my Haier HDW12-TFE3WH stop mid-cycle?
If your Haier Dishwasher stops suddenly during a wash cycle, check the electricity and water supply to the appliance. Make sure that the electricity supply hasn't been cut off and that the water supply hasn't been interrupted.
Why can't I close the detergent compartment lid on my Haier HDW12-TFE3WH?
If the lid in the detergent compartment of your Haier Dishwasher cannot be closed, it may be due to overfilling the detergent compartment or the mechanism being clogged with detergent remnants. Reduce the amount of detergent or clean the mechanism.
What does error code E4 mean on my Haier HDW12-TFE3WH Dishwasher?
If your Haier Dishwasher shows error "E4", it means that the drain hose is either crimped, bent, or too high. Check the drain hose to ensure it's not crimped or bent, and also verify that the height of the drain hose is correct.
Why is there rust on the cutlery after using my Haier Dishwasher?
If you notice traces of rust on cutlery in your Haier Dishwasher, it could be because the cutlery isn't sufficiently rustproof, the salt content in the water is too high, the lid on the salt container isn't tight, or too much salt was spilled while filling the container. Use rustproof cutlery, check and adjust salt levels, tighten the lid on the salt container, and clean up any spilled salt.
Why do my glasses look dull after washing in the Haier Dishwasher?
If glasses have a dull appearance after being washed in your Haier Dishwasher, the amount of rinse-aid may be set too low. Increase the amount of rinse-aid.
General| Wash Programs | 6 |
|---|---|
| Door Colour | White |
| Control Panel Colour | White |
| Built-in Display | Yes |
| Inlet Hose Length | 1.5 m |
| Delayed Start Timer | Yes |
| Delay Start (max) | 24 h |
| AquaStop Function | Yes |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Upper Basket Adjustable Height | Yes |
| AC Input Voltage | 220-240 V |
| AC Input Frequency | 50 Hz |
| Child Lock | Yes |
| Place Settings | 12 |
| Washing Programs | Eco |
| Width | 598 mm |
Check packaging for transport damage and dispose of materials properly.
Appliance intended for household use, connect according to instructions, ensure proper earthing and accessible plug.
Avoid door hazards, adult use only, no outdoor installation, no heavy objects on door, no solvents.
Supervise children, keep detergents away, children not to play with appliance.
Turn off water/power, contact service, use authorized personnel and spare parts.
Cut power cord, remove door lock, take to waste disposal center.
Installer responsibility, qualified person, read safety section, earthing, accessible plug, dispose of old appliance.
Check for damage, recycle packaging, lift carefully, avoid kinking hoses/cords.
Power cord length, no extension cords, hose length, water temperature limits, no high-pressure hot water.
Standpipe requirements, use drain hose support, avoid waste disposal units.
Connect to sink trap with spigot, ensure support, check spigot diameter.
Check door, plug accessibility, and dishwasher levelness.
Identifies buttons, lights, and indicators on the control panel.
Identifies racks, spray arms, filter, and dispenser.
Explains rinse aid function and when to refill.
Instructions for opening dispenser, filling, and adjusting dosage.
Specifies detergent type and when to refill dispenser.
Instructions for opening dispenser, filling compartments, and closing.
Lists materials like wood, delicate glassware, certain plastics, and metals not suitable for washing.
Advise purchasing only dishwasher-proof items in future.
Discusses causes of damage and remedies like using specific detergents and programs.
Instructions for loading pots, pans, bowls, and silverware basket in the lower rack.
Instructions for placing tall glasses, cups, and small bowls on the upper rack shelf.
Describes how to use the knife rack for safe washing of knives.
How to identify the most appropriate programme based on crockery and food remains.
Suggests using the "Half load" function for fewer dishes.
Explains that data is based on standard conditions and lists influencing factors.
Steps to turn on the dishwasher, select a programme, and indicators.
Steps to turn off the appliance after the cycle, including opening the door and turning off the tap.
How to stop a running cycle, caution about water squirting and door opening.
Instructions on how to set a delayed start for a wash cycle.
Explains the function of the Half Load button for washing only the upper rack.
How to use the reset drain function to stop a running cycle.
Turn off water, leave door ajar to prevent moisture and odors.
Unplug before cleaning or maintenance.
Use mild soap and water for cleaning exterior and interior.
Keep appliance vertical during movement, if possible.
Clean seals periodically to prevent odors from trapped food.
Run empty cycle, unplug, turn off water, leave door ajar.
Check for grease/scale, clean interior with detergent solution if needed.
Check the low rinse aid indicator and top up if necessary.
Instructions for checking and cleaning filters (coarse micro-filter, filter unit).
Encourages self-resolution of common issues to save costs and time.
Lists potential reasons why the appliance might not start up.
Explains error codes E3, E4, E5 related to drain hose, water supply, and filters.
Cause is blocked spray arm by items or food.
Causes include overfilling or clogged mechanism with detergent.
Compartment must be dry before adding detergent.
Possible causes include blocked drain hose, jammed pump, or blocked filters.
Covers unusual foam, sudden stops, knocking sounds, and rattling sounds.
Addresses food remnants on dishes due to loading, spray arm obstruction, or blocked filters.
Covers issues like discoloured plastic, white stains, poor drying, dull glasses, rust, and smears.
General important notes.
Instructions for environmentally friendly disposal of old appliances and packaging.
Details on comparability tests according to AS/NZS 2007 standards.
To Next Page
