Haier HSU-18HEA03/R2(DB)-I User Manual

HSU-18HEA03/R2(DB)-I
Introduction
42
2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
5.Unit stop
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
Press ON/OFF button, the unit stops.
1. Unit start
Press ON/OFF on the remote controller, unit sta
rts.
Operation
Cool Operation
AUTO COOL DRY FAN HEAT
Then Select COOL operation
LOW
MED
HI
AUTO
Remote controller
POWER/SOFT

Haier HSU-18HEA03/R2(DB)-I Specifications

General

Brand	Haier
Model	HSU-18HEA03/R2(DB)-I
Category	Air Conditioner
Language	English