EasyManuals Logo

Haier HW120-B14876N User Manual

Haier HW120-B14876N
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
1-Safety information
EN
6
Intended use
This appliance is intended for washing machine-washable laun-
dry only. Anytime follow the instructions given on the label of each
garment label. It is designed exclusively for domestic use inside the
house. It is not intended for commercial or industrial use.
Changes or modications to the device are not allowed. Unintended
use may cause hazards and loss of of all warranty and liability claims.
WARNING!
Installation
Install or use the appliance only where the temperature is above
5 °C.
Do not place the appliance directly on a carpet, or close to a wall
or furniture.
Do not install the appliance in direct sunlight or in the near of heat
sources(e.g. stoves, heaters).
Make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an electri-
cian.
Do not use multi-plug adapters and extension cables.
Make sure only the delivered electric cable and hose set are used.
Make sure not to damage the electric cable and the plug. If dam-
aged have it replaced by an electrician.
Use a separate earthed socket for the power supply which is easy
accessible after installation. The appliance must be earthed.
Only for UK: The appliance’s power cable is tted with 3-cord
(grounding) plug that ts a standard 3-cord (grounded) socket.
Never cut o or dismount the third pin (grounding). After the ap-
pliance is installed, the plug should be accessible.
Make sure the hose joints and connections are rm and there is
no leakage.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HW120-B14876N and is the answer not in the manual?

Haier HW120-B14876N Specifications

General IconGeneral
Door hingeLeft
Water fillCold
Control typeButtons, Rotary
Display typeLED
Loading typeFront-load
Drum materialStainless steel
Product colorWhite
Country of originChina
Custom panel-ready-
Appliance placementFreestanding
Inverter technologyYes
Drum capacity12 kg
Wi-Fi controlledNo
Delay start (max)24 h
Residual moisture52 %
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)65 dB
Noise level (wash)53 dB
Number of washing programs14
Power plug typeType G
Water consumption per cycle56 L
Package depth752 mm
Package width684 mm
Package height962 mm
Package weight89000 g
Customs product code (TARIC)8450200000
Quantity per shipping (inner) case1 pc(s)
Quantity per intermodal container (40ft, HC)90 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width595 mm
Height850 mm
Weight80000 g

Related product manuals