What to do if my Haier HW100-B14876 Washer won't start?
If your Haier Washer isn't starting, there are several things to check: * Make sure the programme has been selected and started. * Ensure the door is properly closed. * Verify that the machine has been switched on. * Check the power supply. * Deactivate the child lock if it is activated.
What to do if my Haier Washer shows error E4?
If your Haier Washer displays error code E4, it indicates that the water level was not reached after 12 minutes. Ensure that the tap is fully opened and the water pressure is normal. Also, check the drain hose installation, as a self-syphoning drain hose can cause this error.
How to stop my Haier HW100-B14876 Washer from vibrating so much during spinning?
Excessive vibration during spinning can occur in your Haier Washer due to several reasons. Ensure that all transportation bolts have been removed from the machine. The appliance should be on solid, level ground. An incorrect machine load can also cause strong vibrations, so check the load weight and balance.
Why does my Haier HW100-B14876 Washer stop mid-cycle?
If your Haier Washer stops before completing the wash cycle, it could be due to a water or electric failure. Check both the power and water supply.
What does error E2 mean on my Haier Washer?
Error E2 on your Haier Washer indicates a lock error. Ensure that the door is shut properly.
Why is there no water in my Haier Washer?
If your Haier Washer isn't filling with water, several issues could be the cause. First, ensure the water tap is open. Also, check the inlet hose for any kinks that might be blocking the water flow. Low water pressure (less than 0.03 MPa) can also prevent the washer from filling. Confirm that the door is properly closed and that there are no water supply failures.
What to do if my Haier HW100-B14876 Washer has a drainage failure?
If your Haier Washer is experiencing a drainage failure, first check if the drain hose is blocked and unblock it. Also, ensure that the drain hose end is not higher than 100 cm above the floor level, making sure that the drain hose is properly installed.
Why is my Haier HW100-B14876 Washer draining immediately?
If your Haier Washer is draining immediately, it might be because the height of the drain hose is below 80 cm, so make sure that drain hose is properly installed. Another reason could be that the drain hose end is reaching into the water. In this case, make sure the drain hose is not in water.
Why is the spinning cycle failing on my Haier HW100-B14876 Washer?
If the spinning cycle is failing on your Haier Washer, it could be due to an unbalance of laundry. Check the machine load and laundry, then run the spinning programme again.
How to reduce excessive foam in my Haier HW100-B14876 Washer?
Excessive foam in your Haier Washer can be due to using an inappropriate detergent, so check detergent recommendations. It can also be caused by using too much detergent, so reduce the amount of detergent you're using.
General| Door hinge | Left |
|---|---|
| Motor type | Beltless |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Appliance placement | Freestanding |
| Washing class | A |
| Annual water consumption washing | 11400 L |
| Annual energy consumption washing | 118 kWh |
| Drum capacity | 10 kg |
| Cycle time (max) | 270 min |
| Delay start (max) | 24 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 58 dB |
| Foam control system | No |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.45 W |
| Power consumption (left-on) | 0.58 W |
| Energy consumption washing per cycle | 0.5 kWh |
| Package weight | 84000 g |
Weight and Dimensions| Depth | 530 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 77000 g |
Crucial safety warnings for preventing injury or suffocation.
Procedures for cleaning and maintaining the washing machine.
Guidelines for correctly installing the washing machine.
Specifies the appliance's designated domestic use and prohibits modifications.
Diagrams and labels identifying the front and rear parts of the washing machine.
List and illustration of included accessories and documentation.
Details on the detergent drawer compartments and their usage.
Explanation of the appliance's digital display symbols and information.
Description of the knob used to select washing programmes and their default settings.
Controls for starting, pausing, and powering the appliance.
Details on using the Extra Rinse and Delay functions.
Explanation of i-time, Steam, Speed, Temp, and Child Lock features.
Instructions for connecting the washing machine to a power source.
Steps for connecting the appliance to the water supply.
Guidance on sorting and preparing clothes for washing.
Guidelines on how to load the washing machine correctly.
Advice on choosing and using the appropriate detergents for different programmes.
Instructions on how to add detergent and softener to the correct compartments.
How to power on the washing machine using the 'On/Off' button.
Guidance on choosing the most suitable washing programme.
How to select additional options and settings for a wash cycle.
How to initiate the selected washing programme.
Steps to pause, resume, or cancel an ongoing wash cycle.
Procedures to follow after the washing cycle has finished.
Instructions for enabling or disabling the acoustic signals.
Tips for optimizing energy, water, and detergent usage for eco-friendly washing.
Step-by-step guide to cleaning the detergent drawer.
Instructions for cleaning the exterior and rubber parts of the appliance.
How to clean the water inlet valve and its filter to prevent blockages.
Advice on cleaning the washing drum and removing rust stains.
Recommended steps for preparing the appliance for extended periods of non-use.
Instructions for cleaning the pump filter, including safety warnings.
Explanation of codes displayed for informational purposes during the wash cycle.
Guide to resolving problems indicated by specific error codes (E1, E2, etc.).
Solutions for common issues that do not display error codes.
Initial steps for unpacking and preparing the appliance for installation.
Instructions for fitting optional pads to reduce operational noise.
Procedure for removing transport bolts and reinforcements before first use.
Guidance on how to move the appliance safely, including reinstalling protection parts.
Instructions for adjusting the feet to ensure the appliance is level and stable.
Detailed steps for connecting the drain hose to various outlets.
Instructions for connecting the appliance to the fresh water supply.
Precautions and steps for making a safe electrical connection.
Detailed technical specifications and energy efficiency data as per EU regulations.
Further technical specifications including dimensions, weight, and power ratings.
Information on the product's compliance with EC directives and harmonised standards.
To Next Page