Why is my Haier HW100-B14636N Washer not spinning?
If your Haier Washer fails to spin, the laundry may be unbalanced. Check the machine load and laundry, redistribute the items in the drum, and then try running the spin program again.
What to do if my Haier Washer shows error E4?
If your Haier Washer displays the error code E4, it means the water level wasn't reached. First, ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation, as the issue might be self-syphoning.
Why does my Haier HW100-B14636N Washer show error E2?
If your Haier Washer displays error code E2, it indicates a lock error. Make sure that you shut the door properly.
What to do if my Haier Washer shows 'UnB' error?
If the Haier Washer displays the error code 'UnB', it indicates an unbalanced load. To resolve this, stop the washer, redistribute the laundry evenly inside the drum, and consider reducing the load size. Then, restart the washing machine.
Why is there so much foam in my Haier HW100-B14636N Washer?
If your Haier Washer is producing excessive foam, which is causing the drum or detergent drawer to float, it could be due to using an inappropriate detergent or using too much detergent. Make sure you are using a detergent that is recommended for washing machines. Also, reduce the amount of detergent you are using per load.
Why is my Haier Washer leaving my clothes dirty?
If your Haier Washer is not washing clothes properly, it might be because the selected wash program doesn't match the level of dirt on your clothes. Try choosing a different program that's more suited for heavily soiled items. Also, make sure you're using enough detergent for the load size and dirt level, following the detergent manufacturer's instructions. Avoid overloading the machine and ensure laundry is distributed loosely in the drum.
Why does my Haier HW100-B14636N leave white residue on clothes?
If you see white spots on your clean laundry after washing in your Haier Washer, these could be insoluble particles of detergent. Try performing an extra rinse cycle to remove them. You can also try brushing the spots off the dry laundry. Alternatively, consider switching to a different brand or type of detergent.
What to do if my Haier HW100-B14636N shows 'E4' error?
If your Haier Washer displays the error code 'E4', it means the water level was not reached or the drain hose is self-syphoning. Ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
What does 'CLR FLTR' mean on my Haier HW100-B14636N?
If the Haier Washer displays the error code 'CLR FLTR', this indicates a drainage error. Check the drain hose installation to ensure it is properly installed.
General| Power plug type | Type F (CEE 7/4) |
|---|---|
| AC input voltage | 220 - 240 V |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 48 L |
| Drum capacity | 10 kg |
| Cycle time (max) | 238 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 67 dB |
| Noise level (wash) | - dB |
| Delayed start timer | Yes |
| Number of washing programs | - |
| Door color | Black |
| Door hinge | Left |
| Motor type | Beltless |
| Drum volume | 65 L |
| Control type | Buttons, Rotary |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Appliance placement | Freestanding |
| Package depth | 695 mm |
| Package width | 650 mm |
| Package height | 890 mm |
| Package weight | 77000 g |
| Repairability index | 6.8 |
Weight and Dimensions| Depth | 600 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 74000 g |
Important safety warnings and precautions for using the washing machine.
Safety guidelines and checks to perform before operating the appliance for the first time.
Safety guidelines for the proper and secure installation of the washing machine.
Safety precautions to follow during the regular operation and use of the appliance.
Detailed information on each wash programme, including load capacity, temperature, spin speed, and functions.
Instructions for connecting the washing machine to an appropriate power source.
Recommendations for choosing and using detergents based on programme and fabric type.
Steps for connecting the appliance to the water tap and checking for leaks.
Guide to choosing the appropriate wash programme using the programme selector knob.
Detailed instructions on how to clean the pump filter, including warnings about hot water.
Explanation of codes displayed on the screen during operation and their meaning.
Solutions for common operational problems that do not trigger specific display codes.
Solutions for problems indicated by specific error codes displayed on the appliance.
Ensuring the power supply, socket, and plug meet the required specifications for safe operation.
Procedure for removing transportation bolts crucial for appliance operation.
Instructions for connecting the drain hose correctly to discharge wastewater.
Instructions for connecting the water inlet hose to the appliance and a water tap.
Information on how to contact Haier customer service for troubleshooting and support.
To Next Page