Why is my Haier Washer not spinning?
If your Haier Washer fails to spin, the laundry may be unbalanced. Check the machine load and laundry, redistribute the items in the drum, and then try running the spin program again.
Why does my Haier HW100-B12636NE show error E2?
If your Haier Washer displays error code E2, it indicates a lock error. Make sure that you shut the door properly.
What to do if my Haier Washer shows error E4?
If your Haier Washer displays error code E4, it indicates that the water level has not been reached or the drain hose is self-syphoning. Ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
Why does my Haier HW100-B12636NE show CLR FLTR?
The CLR FLTR error on your Haier Washer indicates a drainage error. Check the drain hose installation.
How to fix E2 error on Haier Washer?
The E2 error on your Haier Washer means there's a lock error. Ensure you shut the door properly.
What to do if my Haier HW100-B12636NE shows 'UnB' error?
If the Haier Washer displays the error code 'UnB', it indicates an unbalanced load. To resolve this, stop the washer, redistribute the laundry evenly inside the drum, and consider reducing the load size. Then, restart the washing machine.
Why is there so much foam in my Haier HW100-B12636NE?
If your Haier Washer is producing excessive foam, which is causing the drum or detergent drawer to float, it could be due to using an inappropriate detergent or using too much detergent. Make sure you are using a detergent that is recommended for washing machines. Also, reduce the amount of detergent you are using per load.
Why is my Haier Washer leaving my clothes dirty?
If your Haier Washer is not washing clothes properly, it might be because the selected wash program doesn't match the level of dirt on your clothes. Try choosing a different program that's more suited for heavily soiled items. Also, make sure you're using enough detergent for the load size and dirt level, following the detergent manufacturer's instructions. Avoid overloading the machine and ensure laundry is distributed loosely in the drum.
Why does my Haier HW100-B12636NE Washer leave white residue on clothes?
If you see white spots on your clean laundry after washing in your Haier Washer, these could be insoluble particles of detergent. Try performing an extra rinse cycle to remove them. You can also try brushing the spots off the dry laundry. Alternatively, consider switching to a different brand or type of detergent.
What to do if my Haier HW100-B12636NE shows 'E4' error?
If your Haier Washer displays the error code 'E4', it means the water level was not reached or the drain hose is self-syphoning. Ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
Urgent warning about electrical safety and preventing access to children/pets.
Essential safety steps to perform before the initial use of the washing machine.
Rules and precautions for safe daily operation, including child safety.
Warnings related to operating the machine, such as touching hot parts or using flammable substances.
Safety considerations for choosing a suitable installation location.
Requirements for installation environment, power supply, and earthing.
Instructions on switching the appliance on/off and selecting wash programs.
Introduces additional function buttons for customizing wash programs.
Details how to modify wash temperature and spin speed settings.
Comprehensive guide to all wash programmes, including load, temp, fabric, and functions.
How to initiate, interrupt, resume, or cancel a wash cycle.
Explains codes displayed for informational purposes without requiring action.
Provides solutions for common problems indicated by error codes on the display.
Solutions for errors related to specific wash programs or sensors.
Addresses issues like failure to start, fill, drain, or spin, without specific error codes.
Solutions for problems like excessive foam, poor washing, and unbalance errors.
Crucial step to remove transport bolts before operation to prevent damage.
Instructions for connecting the drain hose, including height and placement requirements.
Instructions for connecting the water inlet hose, including Aqua-stop system features.
Ensures proper electrical connection, socket type, and plug standards are met.
Guidance on troubleshooting and contacting customer support for help.
General| Washing Capacity | 10 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ (-30%) |
| Weight | 70 kg |
| Display Type | LED |
| Number of Programs | 16 |
| Loading type | Front Load |
| Noise level washing | 52 dB |
| Noise level spinning | 72 dB |
| Delay Start | Yes |
| Child Lock | Yes |
| Inverter Motor | Yes |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
To Next Page