How to stop strong vibration while spinning in Haier HW100-B14959U1 Washer?
Strong vibrations during spinning can occur if all transportation bolts haven't been removed. Also, ensure the appliance has a solid and levelled position. The machine load might be incorrect, so check the load weight and balance.
How to fix drainage failure in my Haier Washer?
Drainage failure can occur if the drain hose is blocked, so unblock the drain hose. Also, ensure that the drain hose end is not higher than 100 cm above the floor level, making sure that the drain hose is properly installed.
Why is the spinning failing on my Haier Washer?
Check machine load and laundry and run a spinning programme again.
Why is there no water in my Haier HW100-B14959U1?
The absence of water in your Haier Washer can be due to several reasons. First, ensure the water tap is open. Next, inspect the inlet hose for any kinks that might be obstructing the water flow. Also, check if the water pressure is less than 0.03 MPa. Verify that the door is properly closed, and confirm that there isn't a water supply failure.
What to do if my Haier HW100-B14959U1 fails to operate?
If your Haier Washer isn't operating, start by checking if the program has been started. Ensure the door is properly closed and that the machine is switched on. Check the power supply and deactivate the child lock if it's activated.
What does 'Unb' mean on my Haier HW100-B14959U1 Washer and how to fix it?
The 'Unb' error indicates an unbalanced load. To resolve this, check and balance the laundry load in the drum, and reduce the load if necessary.
Why is my Haier HW100-B14959U1 draining?
Your machine might be draining if the height of the drain hose is below 80 cm; make sure that the drain hose is properly installed. Another cause could be that the drain hose end can reach into water; make sure the drain hose is not in water.
What to do if Haier Washer shows error E4?
Error E4 means that the water level was not reached after 12 minutes. Make sure that the tap is fully opened and the water pressure is normal. Also, check drain hose installation, as the drain hose may be self-syphoning.
Why does my Haier HW100-B14959U1 Washer stop before completing the wash cycle?
If the operation stops before completing the wash cycle, check the power and water supply because there may be a water or electric failure.
Why is the washing result poor in my Haier HW100-B14959U1?
A poor washing result can occur if the degree of pollution does not agree with the selected program, so select another program. Also, the detergent quantity may not have been sufficient, so choose the detergent according to the degree of pollution and according to the manufacturer. The maximum load may have been exceeded, so reduce loading. Finally, the laundry may have been unevenly distributed in the drum, so loosen the laundry.
Essential safety checks before operating the washing machine for the first time.
Guidelines for safe operation and interaction with the appliance during use.
Safety precautions related to cleaning and maintaining the washing machine.
Crucial safety instructions for correctly installing the washing machine.
How to activate, deactivate, and understand the child lock function.
Advice on choosing the appropriate detergent for different programmes and fabrics.
Instructions for pausing, cancelling, or restarting a wash programme.
Steps for registering a user profile and pairing the smartphone app with the appliance.
Guide to activating and using the remote control function via the hOn App.
Detailed steps for cleaning the pump filter to ensure proper drainage.
Solutions for problems indicated by specific error or display codes on the appliance.
Guidance for resolving common operational issues not indicated by display codes.
Instructions on how to handle the appliance during and after a power failure.
Instructions for removing transport bolts to allow the appliance to function.
How to adjust the appliance feet to ensure it is level and stable.
Instructions for correctly connecting the drain hose to various outlets.
Procedure for connecting the water inlet hose to the appliance and tap.
Steps for safely connecting the appliance to the electrical power supply.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Motor type | Beltless |
| Drum volume | 63 L |
| Control type | Rotary, Touch |
| Display type | LED |
| Door opening | Side opening |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| Apps supported | hOn |
| Cycle time (max) | 238 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 70 dB |
| Noise level (wash) | - dB |
| Number of washing programs | - |
| Power plug type | Type G |
| AC input voltage | 220 - 240 V |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 51 L |
| Package depth | 636 mm |
| Package width | 650 mm |
| Package height | 890 mm |
| Package weight | 68000 g |
| Repairability index | 8 |
Weight and Dimensions| Depth | 570 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 65000 g |
To Next Page