What to do if my Haier Washer shows E8 Fb error?
If your Haier Washer displays error code E8 Fb, it indicates a continuous leak in the water pressure switch for 10 seconds. To resolve this, open the drain pump to drain the water and then shut down the machine.
General| Door hinge | Left |
|---|---|
| Motor type | Beltless |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Appliance placement | Freestanding |
| Drum capacity | 12 kg |
| Cycle time (max) | 306 min |
| Wi-Fi controlled | No |
| Delay start (max) | 24 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 65 dB |
| Noise level (wash) | 53 dB |
| Washing class | A |
| Annual water consumption washing | 10580 L |
| Annual energy consumption washing | 170 kWh |
| Current | 10 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.42 W |
| Power consumption (left-on) | 0.48 W |
| Power consumption (typical) | 1950 W |
| Energy consumption washing per cycle | 0.79 kWh |
| Package weight | 89000 g |
Weight and Dimensions| Depth | 600 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 80000 g |
Essential safety checks and handling instructions before operating the washing machine for the first time.
Crucial safety advice for children and adults during the normal operation of the washing machine.
Safety measures to follow when cleaning or performing routine maintenance on the appliance.
Important safety considerations regarding the placement and installation of the washing machine.
Specific safety instructions for proper installation, including temperature and electrical connections.
Defines the appliance's purpose, usage context, and restrictions to prevent hazards and warranty issues.
Overview of the control panel, including the display, program selector, and function buttons.
Guidance on sorting clothes by fabric type, color, and dirt level, and preparing them for washing.
Common washing machine problems identified by display codes and their corresponding solutions.
Additional troubleshooting steps for issues indicated by specific display codes.
Solutions for common washing machine problems that do not trigger display error codes.
Further troubleshooting for issues not indicated by error codes, including foam and power failures.
Instructions for safely dismantling and removing all transportation bolts before use.
Various methods for connecting the drain hose, including to a sink or waste pipe.
Instructions for connecting the water inlet hose and the main electrical power supply.
To Next Page