Haier MRV II - 2. Trial operation and the performance

Part 3
unit No.
0-8
1
1
pre-set
1
LED1, LED2, LED3 will display
TA inverter ambient temp.
unit: KG
5
6
7
8
9
10
11
12
13
14
15
1
1
1
1
1
1
1
1
unit: KG TOIL
TOCI
radiator sensor temp.
LED1, LED2, LED3 will display
LED1, LED2, LED3 will display
W-phase compressor current
U-phase compressor current
live wire current
live wire voltage
LED1, LED2, LED3 will display
LED1, LED2, LED3 will display
LED1, LED2, LED3 will display
LED1, LED2, LED3 will display
transducer state(pre-set)
0=normal; 2=standby; 6=emergent stop
defrosting compensation
SW9
SW10 SW11
function
description
unit No.
0-8
01
1
1
TD inverter discharging temp.
2
1
LED1, LED2, LED3 will display
Pd pressure
unit: KG
3
4
1
1
unit: KG
Ps pressure
TS inverter suction temp.
TE inverter defrosting temp.
LED1, LED2, LED3 will display
LED1, LED2, LED3 will display
2.Trial operation and the performance
2.1 Trial operation sequence
Inspection before trial operation
indoor confirmation
outdoor confirmation
wiring confirmation
system confirmation
state setting of trial operation
confirm data of trial operation
power on confirmation
rated operation
solve the problems if failure occurs
- 100 -