Super Match
Operation
• Mode lock setting
1.Proceed through main interface→Menu→ECO→press the "Enter" key to initiate. The default state is
shutdown.
2. Upper temperature limit---the maximum temperature value that can be set for heating mode;
Lower temperature limit ---the minimum temperature value that can be set for cooling/dehumidiîš¿cation mode.
3. Use the leftward and rightward keys to adjust the cursor;the circle ickers where the cursor stays; indicates
"Unselected" press "Enter" and it will change to which indicates "selected".
4. When "Off" is selected, temperature setting is not constrained by energy conservation setting; The range
of temperature adjustment is 16* to 30*; if "On" is selected, temperature setting is constrained with energy
conservation setting.
5. When it has been adjusted to the values corresponding to "Upper limit" or "Lower limit" using leftward
and rightward keys, an underline will appear below the temperature value and now the "Upward" and
"Downward"keys can be used to adjust the temperature; the maximum and minimum temperature values are
16
O
Cand 30
O
C.
6. If energy conservation is on, the main interface will display the icon for energy conservation.
To Next Page
Loading...
Need help?
General
