Super Match
2. Feature
2.1 Easy Instalaltion, More User Friendly
• Easy vacuum & charging
Vacuum and charging every indoor unit just one time from general stop valve(1:4 to 1:5 outdoor unit)
General stop valve
• Easy start up& maintenance
§ Wiring & piping check program: When start up, PCB programme can check wiring &piping correctness
automatically, only need 10min for every indoor unit. If something wrong, the outdoor unit malfunction display
screen will show code. Boost the start up correctness.
§ One screw maintenance panel:New maintencance panel is xed on the side panel, installer only take down
the maintencan panel by take down only one screw, then to check the compressor running frequency and error
from the double 8 screen.
One screw to
take down the
Maintenance
panel
§ In start up& maintenance, software can connect with outdoor unit by TD-02, read all indoor unit & outdoor
unit running parameter, also with the function to show parameter curve.When malfunction happen, show failure
code.
To Next Page
Loading...
Need help?
General
