Overview I-4
Repair Precautions
Layout of workshop
The layout of workshop is of great importance to
the safety and working efficiency.
Protection of vehicle
Use the seat and floor covers.
Use the insulation shield, in order to prevent the
heat and spark from damaging the glasses and
seats during welding.
Protect the accessories including trims and
insertion strips during welding.
Use of Traction Apparatus
When a traction apparatus is used, the working
personnel shall keep away from the working zone
and take cautions in suing the safety cable.
Precautions
During working, wear safety helmet and safety
protective shoes to prevent injuries. Wear protective
articles depending on the working characteristics,
including gloves, protective goggles, earplugs, and
mask.
Welding
goggles
Dust-proof
mask
Earplug
Safety goggles
Welding gloves
Mask
Cotton gloves
Protective shoes
Guard against short-circuit
While disassembling the wires or electric
apparatus, disconnect the negative cable of
battery.
Removal of hazardous articles
Within the area using open fire, move away the
fuel tank and plug the connecting pipes of the
fuel tank, in order to prevent fuel leakage.
To Next Page
Loading...
Need help?
General