66
service hours
every every every
Maintenance work
daily
50 200 500
Check the float switch for proper operation
Check the tank lid seal; renew if required
Check brake and pedal locking for proper operation
Grease squeegee holder and all hinge points of brake
and brush pressure pedal
Check wheel attaching screws and tighten if required (25 Nm)
Check the flexible pane (diaphragm) for possible damages.
Note: Renew the diaphragm pane immediately if defective!
Check steering for slackness, adjust pinion of the steering chain
or replace if required
Grease steering chain
Grease steering bearing
Check fresh water supply to the brushes
(solenoid valve and pump function)
Check roller chain for travel drive for tension,
adjust or renew and grease if required
66
service hours
every every every
Maintenance work
daily
50 200 500
Check the float switch for proper operation
Check the tank lid seal; renew if required
Check brake and pedal locking for proper operation
Grease squeegee holder and all hinge points of brake
and brush pressure pedal
Check wheel attaching screws and tighten if required (25 Nm)
Check the flexible pane (diaphragm) for possible damages.
Note: Renew the diaphragm pane immediately if defective!
Check steering for slackness, adjust pinion of the steering chain
or replace if required
Grease steering chain
Grease steering bearing
Check fresh water supply to the brushes
(solenoid valve and pump function)
Check roller chain for travel drive for tension,
adjust or renew and grease if required
66
service hours
every every every
Maintenance work
daily
50 200 500
Check the float switch for proper operation
Check the tank lid seal; renew if required
Check brake and pedal locking for proper operation
Grease squeegee holder and all hinge points of brake
and brush pressure pedal
Check wheel attaching screws and tighten if required (25 Nm)
Check the flexible pane (diaphragm) for possible damages.
Note: Renew the diaphragm pane immediately if defective!
Check steering for slackness, adjust pinion of the steering chain
or replace if required
Grease steering chain
Grease steering bearing
Check fresh water supply to the brushes
(solenoid valve and pump function)
Check roller chain for travel drive for tension,
adjust or renew and grease if required
66
service hours
every every every
Maintenance work
daily
50 200 500
Check the float switch for proper operation
Check the tank lid seal; renew if required
Check brake and pedal locking for proper operation
Grease squeegee holder and all hinge points of brake
and brush pressure pedal
Check wheel attaching screws and tighten if required (25 Nm)
Check the flexible pane (diaphragm) for possible damages.
Note: Renew the diaphragm pane immediately if defective!
Check steering for slackness, adjust pinion of the steering chain
or replace if required
Grease steering chain
Grease steering bearing
Check fresh water supply to the brushes
(solenoid valve and pump function)
Check roller chain for travel drive for tension,
adjust or renew and grease if required
To Next Page
Loading...
