17
Operation
Knurled screws for handle (Fig. 6/1)
The two knurled screws enable the han-
dle to be adjusted to a comfortable
height for the user.
Shaking device lever (Fig. 6/2)
In order to clean the filter in the dust
vacuum
, switch the shaking device le-
ver several times quickly to the left and
right.
Sweepings container lock (Fig. 6/3)
Pull the lock lever up in order to remove
the sweep
ings container.
Side brush lever (Fig. 6/4)
Use the lever to lower or raise the side
brush
.
Charger cable flap (Fig. 6/5)
The battery charger cable is located be-
hind the flap to the right beside the op-
erating panel. Pull the lock downwards
to open the flap.
To Next Page