HAKO Sweepmaster B500 - Labels on the Machine

9
Safety information
1.7 Labels on the machine
The following safety and warning labels
are attached to the machine where eas-
ily legible. Missing or illegible labels
must be replaced immediately.
Company logo (Fig. 1/1)
Rating plate (Fig. 1/2)
Filter shaker (Fig. 1/3)
Read and observe the operating 
manual (Fig. 1/4)
Maximum permissible gradient 
(Fig. 1/5)
Wear compensator for side brush 
(Fig. 1/6)
Wear compensator for rotary brush
(Fig. 1/7)