32
18.1 Equaliser
The equaliser allows you to adjust the sound of the radio
to suit your preferences by amplifying or reducing the
amount of bass or treble in the audio .
You can choose from precongured proles, adjusted to
suit a variety of music genres, or create your own custom
prole.
• To set the Equaliser, proceed as follows:
[ ]
System settings
Equaliser
• Use [ENTER/NAVIGATE] to choose one of the
precongured proles.
• To create your own equaliser prole, choose the option
My EQ prole setup.
• This takes you to the settings for Bass, Treble and
Loudness (volume amplication).
• To adjust a particular value, press [ENTER/NAVIGATE]
at the corresponding menu item and then change the
value by turning [ENTER/NAVIGATE]. If playback is
already started when you modify these settings, you can
hear the changes in the audio immediately.
• Conrm your settings by pressing [ENTER/NAVIGATE]
once more.
• Complete the conguration process by pressing [
] on
the device and conrm the saving of settings by pressing
[ENTER/NAVIGATE].
• To use the new prole, choose the item My EQ.
18.2 Network
18.2.1 Network wizard – Configuration of internet
connection / Automatic search
The Network wizard supports you to set up a
connection between the radio and internet. Hereby you
can choose between a wired LAN connection and a
wireless connection using WLAN/Wi-Fi. More methods
of conguration and detailed information are amplied
subsequently.
• You can start the Network wizard as follows:
[ ]
System settings
Network
Network wizard
• When the wizard is started, the radio searches for WLAN
(WiFi) connections and then shows a list of the available
networks.
• Turn [ENTER/NAVIGATE] to switch amongst the
networks discovered. At the bottom of the list are
options to restart the search ([Rescan]), select a cable
connection ([Wired]) or congure the connection
yourself ([Manual cong]).
• If your network is not found or the SSID (Service Set
Identication, that is, the name of your network) is not
shown, the network may be hidden or out of range. In
this case, try manual conguration or connecting by LAN
cable.