EasyManuals Logo

Hama DIR3500MCBT User Manual

Hama DIR3500MCBT
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
34
Open network
Note
We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
If you plan to use an open network, you just have
to select the network ID from the list of available
networks and conrm. The radio then connects
immediately to the network.
18.2.3 Wired network connection (LAN)
Connect the radio to the router using a LAN cable. This
method of direct connection is the most reliable and
least susceptible to interference.
The cable connection is listed amongst the available
connections as Wired. Simply select it to proceed. If the
DHCP server of the router or access point is active, then
the connection is now established automatically.
To nd out how to determine whether the DHCP server is
active, please consult the operating instructions of your
router or access point.
18.2.4 Manual configuration of network
connection wireless (WLAN) and wired (LAN)
To manually con gure the network connection, proceed
as follows:
[ ]
System settings
Network
Manual settings
Manual conguration wired (LAN) DHCP enable
Select the option Wired.
Select the option DHCP enable.
The connection is now established. No further setting
adjustments are required.
Manual conguration wired (LAN) DHCP disable
Select the option Wired.
Select the option DHCP disable.
Enter the necessary network information, such as the
IP address, subnet mask, gateway address and DNS
(primary and secondary).
Find this information in the web interface of your router
or access point, or ask your network administrator. Once
all the information has been entered correctly, conrm
to proceed. The radio now attempts to establish the
connection.
Manual conguration wireless (WLAN) DHCP
enable
Select the option Wireless.
Select the option DHCP enable.
In the input screen, enter the whole SSID (network name)
and then conrm with OK.
Now choose the security standard used by the network.
This can be found in the conguration options of your
router or access point.
Depending on the encryption used, you may need
to enter the network key before the connection is
established.

Table of Contents

Other manuals for Hama DIR3500MCBT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hama DIR3500MCBT and is the answer not in the manual?

Hama DIR3500MCBT Specifications

General IconGeneral
BrandHama
ModelDIR3500MCBT
CategoryRadio
LanguageEnglish

Related product manuals