Hama IR40MBT User Manual

17
• Use [ENTER/NAVIGATE] to choose one of the
precongured proles.
• To create your own equaliser prole, choose the option
My EQ prole setup.
• This takes you to the bass, treble and
• loudness settings (volume amplication).
• To adjust a particular value, press [VOLUME/ENTER/
NAVIGATE] at the corresponding menu item and
then change the value by turning [VOLUME/ENTER/
NAVIGATE]. If playback is already started when you
modify these settings, you can hear the changes in the
audio immediately.
• Conrm your settings by pressing [VOLUME/ENTER/
NAVIGATE] once more.
• Complete the conguration process by pressing [BACK/
INFO] on the device and conrm the saving of settings
by pressing [VOLUME/ENTER/NAVIGATE].
• To use the new prole, choose the item My EQ.
15.2 Network
15.2.1 Network wizard – Configuration of internet
connection / Automatic search
The network wizard supports you to set up a connection
between the radio and internet. More methods of
conguration and detailed information are amplied
subsequently.
• You can start the Network wizard as follows:
Press and hold
[ ] [ ]
System settings

Network

Network wizard
• When the wizard is started, the radio searches for WLAN
(WiFi) connections and then shows a list of the available
networks.
• Turn [VOLUME/ENTER/NAVIGATE] to switch amongst
the networks discovered. At the bottom of the list are
options to restart the search ([Rescan]) or congure the
connection yourself ([Manual cong]).
• If your network is not found or the SSID (Service Set
Identication, that is, the name of your network) is not
shown, the network may be hidden or out of range. In
this case, try manual conguration.
15.2.2 Wireless network connection (WLAN)
Depending on the network, there are a number of ways to
connect to it. Networks that support connection via WPS
(Wi-Fi Protected Setup) are identied in the list as [WPS].
Other connections are either open networks or connections
protected with a PSK, or Pre-Shared-Key.
Desired network
WPS-/PSK-/ open network connection
WPS allows simple and nevertheless protected connection
of the radio to the network. Two options are available
for this purpose: The connection can be set up by means
of PBC, or Push-Button Con guration, or by the PIN
procedure, in which the web interface of your router
prompts you to enter a randomly generated sequence of
numbers.
PBC setup
• Select your desired network. (Indicated by the prex
[WPS]).
• In the WPS menu, choose the Push Button option and
conrm your selection by pressing [VOLUME/ENTER/
NAVIGATE].
• Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
• Consult the operating instructions of your router or
access point for details.
• Once the process has been started on the router or
access point, the radio should be able to nd and
connect to the network.
• Alternatively, PBC setup can be initiated from the internet
settings of the radio:
Press and hold
[ ] [ ]
System settings

Network

PBC WLAN setup

Hama IR40MBT Specifications

General

Brand	Hama
Model	IR40MBT
Category	Radio
Language	English