Hama IR40MBT User Manual

22
Press and hold
[ ]
System settings

Auto-Standby
15.11 Multi-room setup on the radio
15.11.1 General information
• All radios must be connected to the same network via
LAN cable or Wi-Fi.
• This section explains how multi-room can be set up on
the devices and managed.
• A multi-room group can consist of up to ve devices (one
master and four clients).
Note
Master and client – explanation
• The master is the source device and transfers the
audio it is currently playing to all other devices
(clients) in the group.
• When playing audio via Bluetooth or from a CD, only
the device that has the corresponding receiver or
playback technology can be the master.
The following modes are available for a multi-room group
(depending on whether the corresponding technology
exists on the radio).
• Spotify Connect
• Internet radio
• DAB radio
• FM radio
• Auxiliary Input
• Wi-Fi streaming (DNLA-compatible) and UPnP
network playback
• USB playback
• CD playback
• Bluetooth
15.11.2 Creating a group
• If you want to create a new group, navigate to the
system settings and select Multi-room. • Select Create
new group.
• Enter a name for the new group and conrm with [OK].
15.11.3 View details
• Select this menu item to obtain information on the current
status of the radio/speaker in the respective group.
• The Status eld shows whether the selected device is a
master or client.
15.11.4 Add clients to a group
• If the selected device is already the master, you can add
(further) clients using Add to group.
• On selecting this menu item, a list of the devices in the
network is displayed. Devices with a preceding asterisk
are already clients in the group.
• Only devices without an asterisk can be added as clients
to the group.
15.11.5 List current clients
• Select List current clients to display all members of the
current group.
15.11.6 Leave group
• The Leave group menu item allows you to remove the
client you are currently controlling from the current
group.
• Conrm the client’s removal from the group with [OK].
15.11.7 Delete group
• If you want to delete a complete group, select ‘Delete
group’.
• Note that a group can be deleted only on the master of
this group.
16. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• If you do not use the product for a long time, turn off the
device and disconnect it from the power supply. Store it
in a clean, dry place out of direct sunlight.
17. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/ or safety notes.

Hama IR40MBT Specifications

General

Brand	Hama
Model	IR40MBT
Category	Radio
Language	English