9
7. Playback and transfer of pictures,
videos and music
7.1 Playback and transfer of pictures
7.1.1 Playback of pictures
• Photos
• By default, the pictures stored on the
Save2Data are displayed.
• Choose whether the pictures from
the
Save2Data or your terminal device should
be shown.
• Tap the picture which is to be displayed.
• The picture is displayed in playback mode.
• Various options are available.
•
/
Choose whether automatic playback is to stop
after showing the last picture or repeat from the
beginning.
•
/
Start and pause the automatic playback.
Note: After a few seconds, automatic playback
switches into full-screen mode. If you tap
the screen, automatic playback is paused
immediately.
•
/
Start and pause the background music.
Note: To enable the background music, rst go
to the Music menu and start playing a track.
Then switch back to the Photos menu and start
playback mode. The music continues playing in
the background
•
Save the currently displayed picture directly on
the terminal device (only during playback from
the Save2Data ash drive).
•
Opens the context menu of the terminal device
with various options.
To Next Page
Loading...
