UM-365HaD-U H46 TPMS TOOL User Guide
User Guide Hamaton H46 Page 14/38
9.1.1. Reprogram ECU through OBDII port
The tool is triggering the sensor.
= continue
= previous
Plug OBDII module into the
OBDII port on vehicle.
= continue
= abort
Note: the following screen message is displayed when all the sensors are triggered and the OBDII
module is connected to the TPMS TOOL.
Wait a few seconds during
the data upload.
Note: this feature is not supported on all vehicles.
To Next Page
Loading...
