5
Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like
one of the following to meet power requirements:
120 VAC, 60Hz
230 VAC, 50Hz
UK 230 VAC, 50Hz
1. Read Important Safety Instructions and Warnings
before use.
2. Place the blender on a dry, level surface.
3. Make sure the power switch is in the “off” or O
position. Plug the blender into a grounded
electrical outlet.
4. Place the container on the base with ingredients
and container lid in place.
5. Set the controls to your preference.
6. Move the ON/OFF switch to the ON (I)
position.
Blender Operation – Quick Start Guide
Power Requirements
To Next Page
Loading...
