EasyManua.ls Logo

Hamlet HHTSPT4GLTE - Default Settings; Reset to Factory Default Settings

Hamlet HHTSPT4GLTE
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
1.8 Default settings
Please refer to the following default settings information of
the 4G Router.
Web management interface access
Username: admin
Password: hamlet
Wi-Fi network name
SSID: Hamlet-4G-xxxx
IP address
IP address: 192.168.100.1
1.9 Reset to factory default settings
If you need to reset the device to factory settings, follow
these steps:
1. Use a sharp object such as a paper clip to press and
hold the "Reset" button for about 5 seconds.
2. Release the "Reset" button and wait for the router to
restart.
3. The factory default settings will be restored so that you
can access the router from your Web browser using
the factory defaults.
Important
The reset to factory default settings procedure erase all of
the configuration settings saved on the router.

Related product manuals