25
6 – Router settings
6.1 Basic configuration
The Basic screen enables you to enable or disable UPnP,
L2TP Pass-Through, PPTP Pass-Through and IPSec
Pass-Through functions.
6.2 LAN settings
Use this page to configure the router’s IP Address on the
LAN and the DHCO Server options.
IP Address: Default setting is “192.168.100.1”.
Subnet Mask: The default setting is "255.255.255.0".
DHCP Sever: Select “Enable” or “Disable” to activate or
disable DHCP server.
To Next Page
Loading...