32
8.5 Time
This page lets you set the time and date for your router, and
configure automatic time synchronization and time zone.
Current Time: Displays the cun-ent time of the device.
Mode: You can select “Auto” or “Manual”.
In “Auto” mode, the router will get time from NTP server
directly. But user should select the correct time zone firstly.
In “Manual” mode, user sets time by the web interface.
NTP Server: The address of the NTP server which will be
used to synchronize the router’s system time and date.
Time Zone: Set the time zone where you are.
Click “Save” to apply the settings.
To Previous Page
Loading...
Need help?
General
