HAMPTON BAY TUDOR User Manual (English)

Questions and Answers:

T
Teresa HigginsJul 29, 2025
How to fix HAMPTON BAY TUDOR Fan that will not start?
- G
  greeneallisonJul 29, 2025
  If your HAMPTON BAY Fan won't start, check the main and branch circuit fuses or breakers. Also, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Ensure the frequency switches on both the remote control and receiver are set to the same frequency. Try turning the AC power off, waiting 10 seconds, and then turning it back on. You may also need to reset the transmitter by performing the “LEARNING PROCESS”.
S
Sally FrazierAug 5, 2025
What to do if my HAMPTON BAY TUDOR remote control is not working?
- S
  smithnicoleAug 5, 2025
  If the remote control for your HAMPTON BAY Fan isn't working, ensure that you have not connected the fan to any wall-mounted variable speed controls. Verify that the frequency switches are correctly set. If issues persist, reset the transmitter by going through the transmitter’s “LEARNING PROCESS”.
M
Melissa WilliamsAug 11, 2025
Why does my HAMPTON BAY Fan move backwards and forwards when turned on?
- T
  Tiffany GrantAug 11, 2025
  The partial movement during start-up is the result of the DC motor aligning the internal magnetic poles for proper motor operation. This design saves electricity and allows the HAMPTON BAY Fan to operate much quieter than standard AC motor fans.
C
Christopher EllisAug 16, 2025
Why does my HAMPTON BAY TUDOR wobble?
- A
  Allison DavisAug 16, 2025
  If your HAMPTON BAY Fan wobbles, first verify that all blades and blade bracket screws are secure, as loose parts often cause wobble. After proper installation, let the fan run for 10 minutes to self-adjust. If wobbling continues, check blade level: measure from the center of each blade to a point on the ceiling, ensuring deviations are within 1/8 inch. If deviations exceed 1/8 inch, contact Customer Service (1-855-HD-HAMPTON) to order complimentary replacements of your brackets. If deviations are less than 1/8 inch and the fan continues to wobble, please call Customer Service (1-855-HD-HAMPTON) to order a complimentary blade balancing kit.
K
Kimberly JohnsonAug 23, 2025
Why is my HAMPTON BAY TUDOR so noisy?
- R
  Robert LaneAug 23, 2025
  If your HAMPTON BAY Fan sounds noisy, ensure all motor housing screws are snug and that the screws attaching the fan blades to the motor hub are tight. Check that wire nut connections aren't rattling against each other or the switch housing's interior. Allow a 24-hour "breaking-in" period for the fan, as most new fan noises disappear during this time. If using a ceiling light kit, ensure the glassware is tightly secured. Verify there's a short distance between the ceiling and the canopy, preventing contact. Also, confirm that your ceiling box is secure and rubber isolator pads are used between the mounting bracket and outlet box.

HAMPTON BAY TUDOR Specifications

General

Fan Type	Ceiling Fan
Fan Diameter (in.)	52
Reversible Motor	Yes
Warranty	Limited Lifetime
Number of Blades	5
Blade Color	Walnut
Blade Span	52 inches
Blade Finish	Walnut