This document is a Use and Care Guide for the Hampton Bay 9-inch Table Top Fan, Model #TF-810S, Item #1005808196. It provides comprehensive information on the fan's function, technical specifications, usage, and maintenance.
Function Description:
The Hampton Bay 9-inch Table Top Fan is designed for household use, specifically for indoor, non-commercial, non-industrial, general domestic cooling of rooms. It is not intended for outdoor use or for use in windows. The fan provides air circulation to help cool a room. It features a rotary switch for selecting different fan speeds and an adjustable head for directing airflow vertically. The fan can be used as a table-top unit or mounted on a wall.
Important Technical Specifications:
- Model Number: TF-810S
- Item Number: 1005808196
- Size: 9 inches (referring to the fan's diameter)
- Power Requirement: 120Vac, 60Hz outlet
- Overload Protection: Employs a fuse for overload or short-circuit situations.
- Fuse Rating: 2.5 Amp, 125 Volt (for replacement)
- Plug Type: Polarized plug (one blade wider than the other)
- Certifications: ETL Listed, Intertek US
Usage Features:
- Placement: Can be placed on a level and dry surface as a table-top fan or mounted on a wall.
- Adjustable Head: The fan head can be adjusted vertically to direct airflow to the desired angle.
- Speed Settings: Features a rotary switch (E) with three speed settings:
- "3" (HIGH)
- "2" (MEDIUM)
- "1" (LOW)
- Off Position: The "0" (OFF) position turns the fan off.
- Wall Mounting:
- Requires a #8 screw (not included) inserted into a wall stud, leaving approximately 3/8 inch exposed.
- The fan's base (C) has an opening to align with the screw for hanging.
- Safety Precautions:
- Always use on a dry, level surface.
- Do not place in a window, immerse in water, or spray with liquids.
- Unplug when unattended, not in use, or before cleaning/moving.
- Do not operate in the presence of explosive/flammable fumes.
- Keep away from open flames, cooking, or heating appliances.
- Never insert fingers or objects through fan guards.
- Do not plug in with wet hands or cord.
- Do not operate with a damaged cord or plug.
- Avoid contact with moving fan parts.
- Do not run the cord under carpeting, throw rugs, runners, furniture, or appliances.
- Arrange the cord away from traffic areas to prevent tripping.
- To disconnect, grip the plug and pull it from the outlet; do not yank the cord.
- Do not operate if the fan housing is removed or damaged.
- Not intended for use with any solid-state speed control device.
Maintenance Features:
- Cleaning:
- Always unplug the fan from the electrical outlet before cleaning.
- Wipe exterior surfaces with a soft, damp cloth.
- Dust can be removed from the guard and blades with a small vacuum.
- Do not immerse the motor, switch, or wires in water.
- Do not allow water to drip into the blade or motor housing.
- Do not use chemical cleaners (acid, alcohol, etc.).
- Ensure the fan is completely dry after cleaning.
- This fan is not intended to be disassembled for cleaning internal parts (blade, motor); disassembly may cause product damage.
- Fuse Replacement:
- The fan employs overload protection with a fuse located in the attachment plug.
- If the fuse blows, unplug the product.
- To access the fuse, slide open the fuse access cover on top of the attachment plug toward the blades.
- Carefully remove the old fuse by prying it out.
- Replace the fuse only with a 2.5 Amp, 125 Volt rating (not included).
- Slide the fuse access cover closed.
- Important: Do not replace the attachment plug itself. Discard the product if the attachment plug is damaged. Do not use the wrong fuse rating.
- Lubrication:
- The product is permanently lubricated at the factory and does not require further lubrication for its lifespan.
- Do not attempt to open the motor housing or lubricate electric motor parts, as this could create a fire hazard and risk electrical shock.
- Storage:
- Store the fan in its original box in a room with low humidity.
- Ensure the product is completely dry before using it after storage.
- Troubleshooting:
- If the fan is not running, unplug it and check/replace the plug fuse.
- If the replacement fuse blows, a short-circuit may be present, and the product should be discarded or returned to an authorized service facility for examination and/or repair.
- If problems are experienced, return the fan to the place of original purchase; do not attempt to open the motor housing yourself to avoid damage or personal injury.
Warranty:
- 1-Year Limited Warranty: Covers defects in materials or workmanship for one year from the original purchase date under normal conditions of intended use.
- Coverage: Replacement or refund of the purchase price at the Warrantor's option, upon presentation of sales receipt or other proof of purchase.
- Exclusions: Damage from accident, misuse, abuse, electrical power surge, or operation not recommended by instructions. Voided if used in a commercial or business environment.
- Limitations: The Warrantor's liability is limited to the original purchase price.
- Contact: Customer Service at 1-855-HD-Hampton or www.Hamptonbay.com.
To Next Page
Need help?
General
