Maintenance
41
After having pumped up the tyre, always make sure to replace the
cap back on the valve, to avoid dirt and sand entering the valve.
6.3 Cleaning
Removing dry dirt
Upholstery, metal parts and frame parts can usually be cleaned easily with a dry soft
cloth.
Removing mud and/or other wet dirt
Parts that are soiled with wet dirt can best be cleaned by first wiping the dirty parts with
a wet sponge and then wiping them dry with a dry soft cloth.
Upholstery
Cleaning with a damp cloth and household soap. After removing the dirt the cleaned
parts should be wiped dry with a soft dry cloth.
• Never use abrasive or aggressive cleansers. They can damage
the scooter.
• Also do not use organic solvents such as thinner, dry-cleaning
naphtha, or white spirit.
• Be careful with water near the electronic system.
• Upholstery: do not dry clean, iron or spin dry.
To Next Page
Loading...
