Your H&S Merger was manufactured with operator safety in mind. Located on the merger are various
decals to aid in operation, and warn of danger or caution areas. Pay close attention to all the decals on
your windrow merger.
DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED,
OR IF YOUR WINDROW MERGER IS REPAINTED, REPLACE THE DECALS.
REMEMBER: DECALS ARE FOR YOUR PROTECTION AND SAFETY.
-32-
DECAL LOCATION
Part # Qty. Description
311 1 Patent Numbers
1494L 1 Danger - Rotating Driveline
1494P 2 Danger - Maintain Safe Clearance
1906C 19 Warning - Stay Clear
5896B 2 Danger - Rotating Driveline
9194A 1 No Step-Stay Clear
11599 7 Warning - Do Not Go Near Leaks
12502A 2 Danger - Stay Clear of Extension
31401 2 Danger - Stay Clear of Merger
32597A 2 Do Not Operate w/Decal Exposed
54033 1 Made In America (4 1/2”)
72203A 1 Warning - Help Avoid Injury
73101 5 Danger - Stay Clear of Moving Parts
82602 1 Warning - Crushing Hazard
82907L 3 Danger - Never Allow Riders
83773 1 H&S Branding Decal
83774 1 H&S Branding Decal
83775 2 6128 Model Number
84044 1 FEMA
84045 1 H&S Since 1967
88994 1 Control Box Decal - Do Not Run Belts
093020 26 Grease
DC32211A 6 Warning - Stay Clear Contact With Tines
DC32211B 7 Warning - Slag Generated By Heating
DCRED 2 2” x 9” Red Reector
DCAMB 4 2” x 9” Amber Reector
To Next Page
Loading...
