Page 24
bytes', where m represents the number of bytes already transmitted, n the size of the entire
file. Once all the files have been transferred to the PC, you can close HTCom.
4.3.6.2 Transferring a File using HTCom from the PC to the Actilino
Start the HTCom program on your PC. Select the menu item "Send file" using the tab key
or the arrow keys, then press the Enter key. A dialog for choosing the files you want to
transmit opens. When you have selected the file you wish to transmit, press the Enter key.
Now another dialog opens and you can specify any desired conversion into grade two
Braille. When you press the Enter key this time, the file will be transmitted.
When the file transfer is complete, you will again be in HTCom's main menu. The transferred
file will be found under the '(F)ile' menu on the Actilino. You can now open it from here as
described above and continue to edit.
To Next Page
Loading...
Need help?
General