Actilino
Operation of the Actilino
Page 74
5.3.1 Table of Key Commands for Controlling the PC
The key combinations for controlling the PC are listed below in the form of a table. We have
included as many combinations as possible; however, if a combination is not shown it does
not mean that it is not possible. All key combinations with [SPC] can either be pressed with
[SPCL] or [SPCR].
Key combinations are represented by the plus sign (+), e.g. Ctrl+Alt+a. Consecutive key
strokes are separated by a comma, e.g. 1, 2 or SPC+2 3 7, z. The cursor routing keys are
abbreviated as CR (e.g. CR12 = cursor routing key above Braille module 12).
Emulated on the Actilino by
Activate/deactivate PC
control
Up: SPC + 1, Left: SPC + 7,
Down: SPC + 4, Right: SPC + 8
SPC + 2 3 4 7 "holds down" the shift key
until SPC + 2 3 4 7 is input again. It is
therefore possible to work with all cursor
movements, such as Home, End, etc. If you
wanted to mark two characters to the right
of the cursor, you would enter SPC + 2 3 4
7, SPC+8 (cursor right) twice and SPC + 2
3 4 7 again
Previous word (Ctrl + Cursor
left)
Next word (Ctrl + Cursor
right)
To Next Page
Loading...
Need help?
General