94
Service & maintenance
1．This truck has been taken pressure trial and performance test before leaving
factory. If there is performance failure, strictly forbid repairing without permission.
2．Close the valves on the LPG cylinder before disassembly and maintenance of the
LPG device.
3．Suitably adjust the measure valve, for LPG consumption is changing with season.
4. Check and clean often the air cleaner and the LPG filter, replace it with a new one
in time if there is any damaged.
5. After finishing the LPG forklift debugging and one day well run (or a full
container of LPG is used up), you should adjust the LPG vaporizer again to ensure
proper ratio of fuel to air.
6.Check the electric system after every three months have elapsed if any switch
connection-peg is oxidized or rusted, and get rid of it in time.
7. Take a routine care for the whole LPG fuel system after every one year working,
that is, clean the vaporizer, check airproof capacity of each tie-in in the high
pressurized pipes and the low pressurized pipes.
IMPCO single fuel system
To Next Page
Loading...