22
5.2 Battery charging
That is, during truck operation the battery discharge process, the battery over-discharge is
prohibited. After the truck is running, it is timely to charge the battery.
WARNING
You must use the original charger provided by our company to charge the battery.
Before the battery is full, try not to interrupt the charging process.
Charging must not be carried out in a warehouse to prevent fire.
Charging Procedure:
–
Park the truck securely.
–
Remove the side door from the body in the direction of the arrow.
– Pull the lithium battery out of the body
– Insert the charger power plug into a suitable power outlet.
– Insert the charger charging plug into the battery plug.
– The charge indicator lights up, the battery is charging, the battery is fully charged for about 2
hours.
– Remove the charger power plug and charging plug respectively after charging, and put the
battery back into the forklift.
CAUTION
Before plugging the battery back, please make sure that the truck is still in the power
off state.
Due to the particularity of lithium batteries, under low-temperature environment, the
battery capacity will have a certain attenuation.
To Next Page
Loading...
