42
10 Relevant safety directive or standard (CE)
After CE certificated, the truck meets the following directive and standard:
– 2006/42/EC machinery directive（namely Directive of the council of the laws of the member
states concerning machinery ）, 2000/14/EC Noise Directive（Namely Directive of the council
of the laws of the member states concerning noise radiation of outdoor equipment）;
– EN ISO3691-1:2015+A1:2020（ Industrial trucks -- Safety requirements and verification --
Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and
burden-carrier trucks ） 、 EN16307-1:2020 （ Industrial trucks. Safety requirements and
verification. Supplementary requirements for self-propelled industrial trucks,other than
driverless trucks,variable-reach trucks and burden-carrier trucks）.
– EN1175:2020 （ Safety of industrial trucks - Electrical requirements - Part 1: General
requirements for battery powered trucks）、EN1726-1:1998（Safety standard for machinery
industrial vehicle ） , EN12053:2001+A1:2008, EN1175:2020, EN 13059:2002+A1:2008,
EN1757-2：2001 harmonized standard;
– Main safety elements are in accordance with 2006/42/EC machinery directive as well as
EN1175:2020, EN1726-1:1998 standard;
Electronic components design and manufacture meet low-voltage apparatus directive
2006/95/EC;
Noise is calculated according to EN 12053:2001+A1:2008: pallet truck noise, sound
pressure value.
Lifting: right ear 65.8dB, left ear 65.1dB
Driving: right ear 68.5dB, left ear 68.4dB
– Vibration data are calculated according to the EN13059:2002+A1:2008（Safety of industrial
trucks - Test methods for measuring vibration ） ,ISO5349-2:2001 and ISO2631-1:1997
standard, meet 2002/44/EC directive: handle vibration amplitude is 0.0558m/s
2
.
– Electromagnetic compatibility is calculated according to EN12895:2015+A1:2019 and meet
2014/30/EU directive.
To Next Page
Loading...
