Accessories 10
9. ACCESSORIES
Ordering Codes Description
HI7632-00 EC/TDS probe for high range mini controllers with 2 m (6.6’) cable
HI7632-00/6 EC/TDS probe for high range mini controllers with 6 m (19.7’) cable
HI7634-00 EC/TDS probe for low range mini controllers with 2 m (6.6’) cable
HI7634-00/4 EC/TDS probe for low range mini controllers with 4 m (13.1’) cable
HI7634-00/5 EC/TDS probe for low range mini controllers with 5 m (16.4’) cable
HI70031P 1413 µS/cm conductivity standard solution, 20 mL sachet (25 pcs.)
HI7031M 1413 µS/cm conductivity standard solution, 230 mL
HI7031L 1413 µS/cm conductivity standard solution, 500 mL
HI7033M 84 µS/cm conductivity standard solution, 230 mL
HI7033L 84 µS/cm conductivity standard solution, 500 mL
HI70038P 6.44 g/L (ppt) TDS standard solution, 20 mL sachet (25 pcs.)
HI70039P 5000 µS/cm conductivity standard solution, 20 mL sachet (25 pcs.)
HI7039M 5000 µS/cm conductivity standard solution, 250 mL
HI7039L 5000 µS/cm conductivity standard solution, 500 mL
HI7061M Cleaning solution for general use, 230 mL
HI7061L Cleaning solution for general use, 500 mL
HI710005 Power adapter, 115 VAC to 12 VDC, US plug
HI710006 Power adapter, 230 VAC to 12 VDC, European plug
HI710012 Power adapter, 230 VAC to 12 VDC, UK plug
HI731326 Calibration screwdriver (20 pcs.)
HI740146 Mounting brackets (2 pcs.)
CERTIFICATION
All Hanna
®
instruments conform to the CE European Directives.
Disposal of Electrical & Electronic Equipment. The product should not be treated
as household waste. Instead, hand it over to the appropriate collection point for the recycling of electrical and electronic
equipment, which will conserve natural resources.
Ensuring proper product disposal prevents potential negative consequences for the environment and human health. For
more information, contact your city, your local household waste disposal service, or the place of purchase.
RECOMMENDATIONS FOR USERS
Before using this instrument, make sure that it is entirely suitable for your specific application and for the environment in
which it is used. Any variation introduced by the user to the supplied equipment may degrade the instrument’s performance.
For your and the instrument’s safety do not use or store the instrument in hazardous environments.
WARRANTY
The mini controllers are warranted for a period of two years against defects in workmanship and materials when used for
their intended purpose and maintained according to instructions. This warranty is limited to repair or replacement free
of charge. Damage due to accidents, misuse, tampering, or lack of prescribed maintenance is not covered. If service is
required, contact your local Hanna Instruments
®
office.
If under warranty, report the model number, date of purchase, serial number and the nature of the problem. If the repair is not
covered by the warranty, you will be notified of the charges incurred. If the instrument is to be returned to Hanna Instruments office,
first obtain a Returned Goods Authorization (RGA) number from the Technical Service department and then send it with shipping
costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection.
MANBL983313 09/22
To Previous Page
Loading...
Need help?
General
