Need help?Do you have a question about the Hanna Instruments edge EC HI2003 and is the answer not in the manual?
General| Brand | Hanna Instruments |
|---|---|
| Model | edge EC HI2003 |
| Category | Measuring Instruments |
| Language | English |
Diagrams of the meter, including LCD, keypad, ports, and probe connection.
Detailed explanation of each button's function on the keypad.
Explanation of all indicators and symbols displayed on the LCD screen.
Steps for initial meter setup, cradle installation, and power connection.
Instructions for setting up the Bench Cradle and Wall Cradle.
Connecting power adapter, USB, and probe. Handling connection messages.
Configuration settings for logging, date, time, auto-off, sound, units, contrast, and general parameters.
Configuration settings for flash format, message transition, reset, firmware, and meter/probe IDs.
Overview of basic mode for streamlined EC/TDS measurements and logging.
Details on logging types: Manual, Stability, and Interval logging.
Procedures for Interval logging and Manual logging, including display messages.
Procedures for Stability logging and viewing logged data.
Accessing and viewing recorded data, including manual, stability, and interval logs.
Procedures for deleting logging types, lots, and individual records.
Procedure for deleting all logged data (Manual, Stability, and Interval logs).
Transferring logged data to a USB flash drive via the log recall function.
Transferring logged data to a PC via micro USB cable.
Optimizing EC measurements, basic vs. standard modes, and available measurements.
Overview of EC meter configuration for conductivity, TDS, and salinity.
Configuration options for temperature compensation, cell factor, T.Coef., T.Ref., and TDS factor.
Configuration for EC range, TDS range, TDS unit, and salinity scales.
Procedure for manual calibration of the cell factor using a custom standard.
Guidelines, preparation, and procedure for EC/TDS calibration.
Calibration procedure and conductivity vs. temperature chart.
NaCl % calibration procedure and handling wrong standards.
Messages displayed during calibration, including wrong temperature.
Details on calibration messages like 'WRONG STANDARD TEMPERATURE'.
Viewing GLP data for EC calibration: cell factor, offset, solution standard, and T.Coef.
Viewing GLP data for EC calibration: reference temperature, time, date, expiration status, and probe serial number.
Viewing GLP data for NaCl% calibration: cell factor, coefficient, solution, time, date, and expiration status.
Performing EC/TDS measurements, handling errors, and temperature compensation.
No TC measurements, error messages, and TDS measurements.
Switching to salinity measurement and available salinity scales.
Details on PSU (Practical Salinity Units) calculation and NaCl % Percent Scale.
Natural Sea Water Scale definition and application note.
Instructions for cleaning and handling the EC probe.
Common issues, problems, and their solutions for meter operation.
To Next Page