Setup/Installation 15
Stability Logging
Select Stability and choose measurement stability
criteria in the SETUP menu. Only Stability Medium
is available in Basic mode. To initiate the Stability
log, press the LOG key while the instrument is in
measurement.
The “PLEASE WAIT” screen will be displayed brie y
followed by a screen showing the stability tag, “LOG”
tag and a “WAITING” message. The log can be stopped
while the “WAITING” message is displayed by pressing
LOG again.
When the stability selected criteria has been met,
a “SAVED” message will be displayed followed by a
screen indicating how much log space is available. The
“LOG” tag will be displayed on all 4 screens.
“PLEASE WAIT”
“WAITING”
“SAVED” with the log record number
“FREE” with the number of free spaces available
All log records stored on edge
EC
® may be viewed on the meter by pressing the
RCL key.
If no sensor or probe is connected, use the u arrow
to select the desired measurement type. Press CFM to
display those logs.
Choices are:
• Manual log on demand lot,
• Manual log on stability lot,
• Individual Interval logging lots.
If no data was logged for the selected measurement
range, the instrument displays the following
messages:
• “NO MANUAL LOGS”
• “NO STABILITY LOGS”
Press CFM to enter inside lot information to view recorded data.
Use the ARROW keys to toggle between di erent records.
Use u to display GLP data including calibration information, date, time, etc.
Press CLR then CFM when deleting records or lots.
Press RCL to exit the logging type.
Press RCL to return to the measurement screen.
Logging
Function
Viewing
Logged
Data
To Next Page
Loading...
Need help?
General
