Hanna Instruments edge EC HI2003 User Manual

Maintenance 33
Rinse the probe with clean water after measurements. If a more thorough
cleaning is required, remove the probe sleeve and clean the probe with a cloth
or a nonabrasive detergent. Make sure to reinsert the sleeve onto the probe
properly and in the right direction. After cleaning the probe, recalibrate the
instrument.
The insulator used to support the platinum rings is made of glass. Use extreme
caution when handling this probe.
Maintenance
EC Probe
Maintenance

Hanna Instruments edge EC HI2003 Specifications

General

Brand	Hanna Instruments
Model	edge EC HI2003
Category	Measuring Instruments
Language	English