12
Connect the power adapter cable to the bottom socket of the wall cradle. Connect the other end to the
power adapter and plug into line power.
Connect the 3 mm probe jack to the socket located at the bottom of edge
® DO
.
Slide edge
® DO
into the wall cradle. Verify the battery icon indicates charging.
Power Connection
Alternatively to using the cradle for power, edge
® DO
can be powered by micro USB socket at the top.
Plug the 5 VDC adapter into the power supply socket or by connecting directly to a PC.
Note: edge
® DO
is supplied with a rechargeable battery inside, which provides about 8 hours of
continuous use. Whenever edge
® DO
is connected to the power adapter or to a PC, the battery
is charging.
SETUP/INSTALLATION
To Next Page
Loading...
