18
Stability Logging
Select Stability and choose measurement stability criteria in the SETUP menu. To initiate the Stability
log, press the LOG key while the instrument is in measurement.
The “PLEASE WAIT” screen will be displayed briefly followed by a
screen showing the stability tag, “LOG” tag and a “WAITING” message.
The log can be stopped while the “WAITING” message is displayed by
pressing LOG key again.
When the stability selected criteria has been met, a “SAVED” message
will be displayed followed by a screen indicating how much log space is
available. The “LOG” tag will be displayed on all 4 screens.
“PLEASE WAIT”
“WAITING”
“SAVED” with the log record number
“FREE” with the number of free spaces available
VIEWING LOGGED DATA
All log records stored on edge
® DO
may be viewed on the meter by
pressing the RCL key.
Use the keys to chose the type of logging records to view.
Choices are:
• Manual log on demand lot,
• Manual log on stability lot,
• Individual Interval logging lots.
SETUP/INSTALLATION
To Next Page
Loading...
