24
• The time (hh.mm.ss) is displayed on the LCD, along with the
“TIME” tag.
• The date (yyyy.mm.dd) is displayed on the LCD along with the
“DATE” tag.
• The calibration offset is displayed on the primary LCD and “OFS”
message on the secondary LCD.
• The calibration slope is displayed on the primary LCD and “SLP”
message on the secondary LCD.
Note: If in Relative mV RECALL mode, the instruments will display “----”
message on the primary LCD.
• The interval for lot logging (HI 2215 only).
To delete manually logged records, press CFM while “MAn” is
displayed to view manually logged records. Press the CLR key,
“dEL” and the record number will be displayed. Press CFM to
delete. Use the ARROW keys to change the record number.
To delete a lot, use the ARROW keys to select the desired lot. Press
CLR key, “dEL Lot” will appear on the display. Press CFM key to
delete.
25
The “dEL” message is displayed on the primary LCD and the
selected record on the secondary LCD, along with ”LOG” tag.
Notes: • The ARROW keys can be used to change the record.
• Press SETUP to delete all records/lots. The display will show
“dEL” on the primary LCD and “ALL” on the secondary LCD.
• Press CFM to confirm delete.
• Press CAL or RANGE to escape and return to RCL screen.
• If “dEL ALL” option was selected, all the log on demand
records or lots are deleted. While deleting the “ ” tag is
displayed blinking.
• Press RCL to exit record information and enter lot information
(HI 2215 only).
• Press RCL again to return to measurement mode.
• If one or more records/lots were deleted the “ ” tag blinks
until the log memory space is reorganized.
To Previous Page
Loading...
Need help?
General
