59
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the
environment in which they are used.
Operation of these instruments in residential areas could cause unaccept-
able interferences to radio and TV equipment.
To maintain the EMC performance of equipment, the recommended
cables noted in the user's manual must be used.
Any variation introduced by the user to the supplied equipment may
degrade the instruments' EMC performance.
To avoid electrical shock, do not use these instruments when voltage at the
measurement surface exceed 24VAC or 60VDC.
To avoid damage or burns, do not perform any measurement in microwave
ovens.
Unplug the instruments from power supply before the replacement of the
fuse.
External cables to be connected to the rear panel should be terminated with
cable lugs.
CE DECLARATION OF CONFORMITY
To Next Page
Loading...
Need help?
General
