13
OPERATIONAL GUIDE
Note: When the maximum number of samples has been reached
(199), the LCD display will show “FULL”. This is a warning that
you will be overwriting the oldest sample recorded. To store
the current sample, press the STO button again and this will
overwrite the oldest sample in the memory. All samples are
shifted (reference numbers reduced by one). Sample number
one remains the oldest sample.
6.3. CLEARING LOGGED DATA
• Press the ALT & CLR buttons together. The display will show “CLR”
for confirmation. Press ALT & CLR again to clear memory. To abort
the operation, press any button.
All samples previously stored will be erased from memory!
6.4. VIEWING LOGGED DATA
• Press the ALT & VIEW buttons together. The last sample will be
displayed.
To Next Page
Loading...
Need help?
General
