21
To end the OUR test before the maximum time interval set during OUR configuration press Stop.
If Stop is pressed before the minimum time for the OUR test has elapsed, the instrument will display
a warning message.
Press Resume to continue the test or Stop to end the test.
At the end of the test the meter will display the computed OUR value and the duration of the test.
Press LOG to save a complete set of data regarding the OUR test.
Press Start to begin a new OUR test.
Notes: If at the end of the test the DO reading is less than the minimum end DO value set
during OUR configuration, a warning message will be displayed.
Press any key to clear the message from the screen, or press HELP to view detailed information
about the warning.
If the DO value at the end of the test is greater than the DO value from the beginning of the
test an error message will be displayed.
Press Start to begin a new OUR test or ESC to return to the OUR measure screen.
OUR MEASUREMENT
To Next Page
Loading...
Need help?
General
